Fume Extractor / Ventilator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fume extractor base /w box for electronics and battery.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
First time uploading here 🍀
This is base for fume extractor (or ventilator if you chose so) it's made from two coolers from Xbox 360 glued together.
Base is hollowed out for electronics and battery, there is spot for generic PCB with 4056H (check on AliExpress if not sure) and barrel jack connector for power sources.
It is quite powerful since it is almost 20W (if some people end up being interested in it, I might upload my wiring).
As for assembly, you need to glue 2 mounts (they are different dimensions/models) and after that is is straight forward.
I will also include first version if someone finds it useful.
Also for the final note, design has some rough spots so ask for second revision if you end up liking it.