STRECHR - stackable ball stretcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
KDxGP STRECHR
Check out my socials and other things at https://linktr.ee/KDxGP
Like my creations?
Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP.
Thank you!
STRECHR is a stackable ball stretcher design you can print at home. This is version 1. It is offered in the following sizes:
- 30mm Inner Diameter (see 'STRECHRv1_d30')
- 33mm Inner Diameter (see 'STRECHRv1_d33')
- 36mm Inner Diameter (see 'STRECHRv1_d36')
- ... you get the idea
STRECHR has three different parts. A top piece, an extension and a flat bottom. The parts you like to use need to be printed twice each.
To ensure that the stacked parts are not coming apart, twist each layer 90 degrees against to others as shown. Stack as many as you like.
Recommended Print Settings:
- Layer Height: 0.2 mm
- Perimeter: 4
- Infill: 40%
- no supports
Happy stretching!
