Klarstein Cool Cousin "freezer handle" + Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Klarstein Cool Cousin "freezer handle" + Hinge
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 227
- Wydruki
- 2
- Wyświetlenia
- 742
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I broke the opening handle of my refrigerator. I couldn't find a spare part, so i build a new one. Maybe someone can need it ;D
The model of the refrigerator is or some others.
- Klarstein Cool Cousin
- (HEA9-C.Cousin)
- (80L)
The original handle is out of HIPS
- Part No. DF1-170.00.01-03
I tried PETG and it just works fine. I also added a logo but you don't need it :D
Printer setting for the handle:
- PETG
- 10 Perimeter so it is solid or just make 100% infill for strength
- 0,2 layer high
- no supports
-------------------------------------
UPDATE:
some people asked for the hinge so i make one that's working
Printer setting for the hinge:
- PETG is working or something like that's not brittle (Nylon)
- 10 Perimeter so it is solid or just make 100% infill for strength
- 0,2 layer high
- need support as seen on the pictures , there are supports in the model you need to remove after (S1-s35)
- print it slow (1h 25min)
- print it in the orientation as shown on the picture
(I printed on a Prusa XL with only one toolhead cause it takes to long on two)
please let me know if there is a problem or something better to make