Fursuit- or puppet-head base - version 81 - Legoshi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This head base was made to build a cosplay costume of Legoshi from Beastars.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 222
- Wydruki
- 1
- Wyświetlenia
- 1505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This head base was made to build a cosplay costume of Legoshi from Beastars. The head base can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable.
The ears are not included. Having rigid ears on a costume is not a good idea. I would make those with flexible foam.
The head is scaled for costume size (for small heads) - rescale it if you need to.
How to make the pegs for the lower jaw:
Print Settings
Printer:
Alfawise U10
Rafts:
No
No
Resolution:
0.2mm
15%
Filament: Eryone PLA Gray
Notes:
I print these models with a 6mm brim
Category: Costume