1 / 5
Horned Skull Lamp | Demon Skull | Skull with Horns — zdjęcie 1
1 / 5

Horned Skull Lamp | Demon Skull | Skull with Horns

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skull with horns, hollowed out to be used as a lamp or anything you can imagine.

Ocena
4,935 / 5
Polubienia
1595
Pobrania
6362
Wydruki
37
Wyświetlenia
20 432
Oceny
31

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

Hey makers.

Today i bring you this model that i intend to use as a lamp, it's Hollow and you put a 5v LED lamp (or whatever you might have laying around) inside it.

The original model had a lot of polygons and i simplified it a bit but it still has a lot, so it will take a while to slice, i also made sure to have the horns sit at a nice angle for printing but it might need extra supports depending on your machine and settings.

Definitely use White or a light colored material with not too much infill so that light can pass through.

There's two versions of the model, one has a hole in the back for cables and stuff.

FDM machines should use supports for the eyes.

Good luck!

Tagi