1 / 4
Design cutting board stand (With fusion360 and freecad source file) — zdjęcie 1
1 / 4

Design cutting board stand (With fusion360 and freecad source file)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A nice design cutting board stand

Ocena
4,5 / 5
Polubienia
4
Pobrania
145
Wydruki
2
Wyświetlenia
391
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Customization

The design is parametric and takes height (see drawing) of the board into account so that the stand is not wobbly.

            +----------------------+        +-+
            |                                  |         |   |
height |                                  |         |   |
            |                                  |         |   |
            +----------------------+        +-+
                         width                 thickness

Different sizes available for different thicknesses of boards. Take the next biggest size to fit your board.

There is a 1.5mm clearance between the board thickness and the slot thickness.

If your needs are not fulfilled:

  • use the f3d (fusion360) source file to change according to your needs.
  • just leave me a message and I'll export it for you.

EDIT 16.09.2025:

Fusion360 is dropping support for windows 10 and I do not want to update my PC just for that.
I will stop any further modeling in Fusion360.

I remodeled this completely in Freecad and uploaded the source file as well. Enjoy !

Print parameters

Printed with following parameters it took a bit over 1h15 on my printer (JGAurora A1)

  • PLA+ (JAYO Black)
  • 0.4mm nozzle
  • 0.2mm layers
  • 3-4 perimeters
  • 5 layers top bottom
  • 20% infill grid
  • Mouse ears for the feet (optional, but helps with adhesion)

Edit 02.08.2024:
I changed the design dimensions a bit, it was unstable due to an error in the calculation.

Tagi