Window plank locking kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modules used to lock a plank on an open windows for climatization exhaust passthrough
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Modules used to lock a plank on an open windows.
In my use case, the plank is used to route the exhaust vent of my air conditioner to the outside.
Once assembled, turn 90 degree clockwise to expend the locking parts and continue to turn to tighten.
Turn counterclockwise to unlock and retract the locking parts.
Handles visibles on the pictures are thoses : https://www.printables.com/model/876605-handle
Hose adapter used is this one (01_CoolerWall.stl) with the screw holes inside removed : https://www.printables.com/model/329507-cooler-air-conditioner-pipe-accessories
How to print :
- PETG or greater is mandatory for mechanical stability
- Printed with a 0.4mm nozzle at 0.2mm layer height
- The screw should be printed with at least 3 walls and 20% infill or greater
- The plate's stoppers should be printed with at least 3 walls and 50% infill (use modifier)
- The locks should be printed with at least 3 walls and 20% infill
- No support required