1 / 5
SpartanRace Medal Holder-Runner Silhouette Design — zdjęcie 1
1 / 5

SpartanRace Medal Holder-Runner Silhouette Design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ho realizzato questo porta medaglia prendendo spunto da quello originale della Spartanrace.

Ocena
0 / 5
Polubienia
38
Pobrania
272
Wydruki
0
Wyświetlenia
2526
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

📌 Description

I created this medal holder inspired by the official SpartanRace support, giving it a unique personal touch with the silhouette of a runner—a symbol of strength, endurance, and determination.

Designed for easy wall mounting, it’s the perfect way to proudly display your race achievements.

🔧 Mounting Instructions

Drill 2 holes in the wall and insert 6 mm wall plugs

The medal holder has 5 mm mounting holes – use 5 mm screws

Insert a spacer between the wall and the medal holder to allow room for the medal ribbons to pass behind

⚠ Print Bed Requirement

The model does not fit the Bambu Lab P1P/X1C/P1S print bed (256×256 mm).
For this reason, I couldn’t include a print profile (.3mf).

🛠 Options:

Use a printer with a minimum 300×300 mm bed

Or scale the model down (e.g., to 90%) using your slicer

🖨 Recommended Print Settings

Material: PLA or PETG

Layer height: 0.2 mm

Infill: 20–30%

Supports: Only if needed depending on orientation

Mount: Wall or display surface

💬 Printed It?

If you’ve printed this model, share a photo with your Spartan medals proudly mounted — I’d love to see it!

Tagi