Steering for kids soap box car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a better steering than the usual rotating axel.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Picked up that soap box car for 25 at local thrift store. Kinda nice, but unusable steering and awful brakes.
So I made this fancy new steering, now it only has awful brakes.
Uses plywood and 3D printed parts and some screws. the ball joints are from aliexpress (Right Thread, Si6 M6)
Take a look at the fusion360 files for details.
All bushings, rack guides and the pinion are printed in nylon. Other parts are printed in PLA.
Important: You cannot mirror the "Steeringknuckle" since the thread will be unusable if you do.
update:
while adding disc brakes, I replaced the steering column with a 12mm steel rod which allows a smaller diameter gear for finer steering (less steering angle per steering wheel rotation)
See “Wheel hub.stl”, Wheelhub clamp 12mm.stl, Gear M2 Z11.stl and Gear M2 Z11 Clamp.stl
disc brakes: https://www.printables.com/model/1068975-disc-brakes-for-kids-soap-box-car