Gyro spinner bangle bracelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gyro 3 rings fidget toy spinner
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 585
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Modular three ring gyro bracelet, pictures of items printed in rPLA, .10 layer height.
It's modular. You can click the 3 rings out and switch them around with other colors. I just need to apply a mild amount of pressure to put the rings together and take the bracelet apart, might be different based on your printer and/or material.
The tolerances are .2 - .3 mm. If that's too tight for your printer, you can separate all the rings in the slicer. In Prusaslicer: left click the model > split > to objects.
Model size 57 mm: 2,24 inch (S) – that's the inside diameter. For other sizes: I'd resize the model in your slicer (x-y-z). Make sure the connections still work. Don't hesitate to drop me a message and I'll make you the preferred size :).
For me this is a fidgeting toy… but I assume it could be cool as an illustration to explain some physics to (small) kids. Do let me know which other uses you see!