Enphase IQ Gateway and Comms kit coverplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cover plate for the Enphase Gateway is a great way to hide the wires and the Comms Kit (for the Enphase battery).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This cover plate hides the Enphase Comms kit, which is needed for an Enphase battery. It's mounted under the IQ Gateway to keep the wiring out of sight. The cover plate was designed because the IQ Gateway and the Comms kit couldn't be hidden in the meter box, so it's hanging out in sight and not very nice to look at.
You can use a transparent cylinder to give the effect that a LED is mounted in the cover plate, but actually the cylinder is made of transparent filament and can be mounted at the level of the LED on the comms kit in the cover plate. You'll need to drill a hole at the spot you want it to go. Then, glue the transparent PLA cylinder into the ring and stick it into the cover plate from the inside.Figure out the dimensions of the cylinder and ring so it'll fit your situation.
The cover plate is custom-made, so it's not a standard solution for everyone. But maybe there are people who can use this idea.