1 / 7
Yet Another Spirit Island Insert (up to Nature Incarnate) — zdjęcie 1
1 / 7

Yet Another Spirit Island Insert (up to Nature Incarnate)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a two-box insert / organizer for Spirit Island and all expansions up to Nature Incarnate.

Ocena
0 / 5
Polubienia
4
Pobrania
33
Wydruki
1
Wyświetlenia
588
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

This is a two-box insert / organizer for Spirit Island and all expansions up to Nature Incarnate. No lid lift, allows vertical storage. Printed with PLA, 0.4mm nozzle, 0.2mm layer height, 2 perimiters, low infill.

Why would you prefer this insert over the other great inserts out there? This insert was designed with bigger groups in mind, instead of just solo or two-handed:

  • Double trays for tokens & energy and explorers & towns
  • Expanded storage space for extra explorers and towns
  • Simple setup & teardown, anybody can help

Also features:

  • Storage for all 37 thick spirit panels
  • Storage for sleeved cards
  • Thin trays to reduce filament cost and print time
  • Color markings in trays to simplify cleanup

Downsides:

  • Does not store the manuals, old scenario tokens or the little adversary reminder bars
  • Not tested with premium tokens, though they might still fit
  • Does not fit sleeved adversaries and scenarios

 

Printing & usage tips

 
Box 1
  • The bottom parts around the island boards are fitted together from multiple prints. Recommend testing out a fitting before printing all of them.
  • Many trays have holes for optional color-coded notches. You'll need 3 colors; 2 notches of one color, 3 notches of a second color, and 4 notches for the third.
  • Recommend printing or sourcing extra Explorers & Towns to fill both trays. Alternatively, swap one of the trays for the generic version without labels (see Optional parts), and use them for whatever you want.
  • There are 2 fear trays. One is used during play to put generated fear in, the other is for the fear tokens that aren't used.
  • Elements tray has an alternative version with segmented trays. See Optional parts.

 

Box 2
  • The tray with the Fear dividers has a hole at the bottom, they would not fit otherwise. Recommend just keeping the tray in the box during setup.
  • The same tray has a 'miscellaneous' section at the back. I keep Slave Rebellion and some extra sleeves there.
  • The little tray with Dice is optional.
  • The card dividers are optional. They consist of the divider, logos and text, all printed separately, then glued together. Recommend printing the logos and the text with a .2 nozzle and doing a color change half way. A .4 nozzle probably won't give good results here.

 

See also

Tagi