1 / 2
Pusi Negotiator for Trinity Origin Decanter 155 Filter Module
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pusi Negotiator for the Trinity Origin Decanter 155 Filter Module
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix from my design of the Pusi Negotiator, but redesigned to fit the Trinity Origin Decanter 155 Filter Module. Thanks to EAF member @longpvo for the measurements, photos and providing feedback on the print.
Note on nomenclature: Pusi (푸시) is the Korean word for PUSH. Thanks to EAF member @heytchap for the name.
Updates: 20 Jan 2025 - dimensions updated to fit better.
Printing tips:
- There are some chamfers so its best to use low layer height 0.16mm or lower for visuals, but go nuts with layer height if you don't care about looks.
- Recommend PETG if you use hot water to rinse filters, otherwise PLA/PLA+ is fine.
- Extra walls and higher infill recommended (but not needed) to give a more solid feel to the shaft / handle.
- You may also want to print with ironing on top layer for a nicer finish.
- No supports needed, just print flat on the bottom.