Dice Box / Rolling Tray / phone stand (print-in-place hinges!) - magnet insets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of dnd dicebox/rolling tray/miniature holder/tablet or phone stand from @stuckpixel - added magnet insets.
- Ocena
- 4,333 / 5
- Polubienia
- 64
- Pobrania
- 523
- Wydruki
- 7
- Wyświetlenia
- 2324
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print).
The magnets require a bit of force to be inserted. I used a hard object to press one side into the insets. No glue required. I placed the magnets for the other side onto the first magnets which helps with the polarity and closed the box to press the magnets into the other insets (see pictures).
I printed the wood pattern model with sunlu wood pla. I had to set the temperature to 195°C for the first layer and after that 200. I also had to use the smooth PEI sheet, otherwise the filament wouldn't stick.