1 / 4
Bike fork fenders / mudguard clamp (FreeCAD parametric) — zdjęcie 1
1 / 4

Bike fork fenders / mudguard clamp (FreeCAD parametric)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another one, this time parametric :)

Ocena
0 / 5
Polubienia
24
Pobrania
101
Wydruki
0
Wyświetlenia
506
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Default is for 35.8mm fork diameter. This works well with SR SUNTOUR XCE28 fork. If you need another diameter, edit bar_d value in the spreadsheet. I printed it with PETG and 2 mm clamp_th thickness seems to be optimal for it, at least I broke 3 mm when tried to mount it on the fork. The part that deals with the bolt should be thicker and I set clamp_mount_th to 4 mm which seems to be strong enough, but you can set this value even higher if you prefer more weight and more reliability. clamp_hole_d is set to 4.3 mm for M4 bolts, you can change it to 5.4 mm if you use M5 bolts.