1 / 3
X_carriage for 48mm Z Motor, for Aviran_N's 3D Printed DIY CNC - Dremel CNC Remix — zdjęcie 1
1 / 3

X_carriage for 48mm Z Motor, for Aviran_N's 3D Printed DIY CNC - Dremel CNC Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

X_carriage for 48mm Motor Added cutouts to fit a 48mm stepper motor. Added a "nema17-Plate" to replace the thick washers

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
260
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Added cutouts to fit a 48mm stepper motor.

Added a "nema17-Plate" to use instead of the thick washers, it will stop the motor twisting in the adjustment slots (takes advantage of the slot for the motor shaft).

The 3mf file contains support blockers to prevent the square nut slots being blocked, it also contains the "negative volume" for the motor cutout. these show up as solid blocks in the 3D viewer but do not get printed.

Produced and edited with Prusaslicer