Longer USB Parking Brake / Hand Brake Holder Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Long enough to fit in the furthest back screw position, replacing the original hook.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Replaces the stock hook on the handbrake. Will fit into the furthest back position, unlike the stock hook. The hook that I received with my USB Parking Brake was just barely short. While modeling in Fusion; I traced the original hook via photo. Extruded, cut, extended by just 2mm, and lofted the pieces together. I will gladly make different versions if necessary. Please leave a comment if so.
Print Settings
----------------------
I rarely print with such high plastic usage, but this part will see some abuse. So, I thought it was appropriate here.
- 5 Walls
- 5 Top / Bottom Layers
- 100% Rect