Modular PTFE Joiner - DIN Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,51 € – 0,63 € netto (bez VAT)
Dla pliku: PTFE_Joiner_DIN_0.2mm_PLA_MK3SMMU2S_40m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,57 € netto (środek widełek).
- Masa podana przez autora
- 5 g
- Czas druku podany przez autora
- 40,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Route PTFE tubing in a way you can change later!
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 1139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was tired of using double-sided tape to fasten my tubing to the back of my enclosure. I wanted something that was solidly attached, but could still be changed at a moment's notice.
My solution was to use DIN rail to make a modular system that enables me to move the joiners around at any time! I can also use my other SnapDIN pieces to add wire management alongside my PTFE tubing.
This print works better if your PTFE tubing is chamfered at the end; guiding the filament in. Here is a fantastic tool I use to chamfer the ends of my tubing: https://www.prusaprinters.org/prints/46984-ptfe-tube-60deg-chamfer-tool-by-printschnitzelat
Here are the PC4-M10 couplers I bought:
https://smile.amazon.com/dp/B078SRBDS7/
Here is the DIN Rail I bought:
https://smile.amazon.com/gp/product/B01JH2RZWC/