1 / 3
Decorative Stand - No Supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Good for displaying your item of choice! Does not require supports
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I made this stand in Fusion360 for a friend who had gotten a decorative knife souvenir from Pompeii, Italy.
While the part does not require supports, it is recommended to print it with a low layer height to ensure the layers are nice and clean on the sloped sections.
The diameter of the fork is 22.278 mm. Scale the stand to the size of your choice!