Beretta 87T magazine holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual magazine holster for cal. .22 Beretta 87 Target with belt clips. Friction fit retains magazines. The tolerances…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Dual magazine holster for cal. .22 Beretta 87 Target with belt clips. Friction fit retains magazines. The tolerances are tight, so minor size adjustments in the slicer may be needed, depending on your printer.
I tried a flexible friction fit (small tabs inside that can flex), but they didn't seem to work, so I ended up with a classic friction fit.
You will need to print two of the clips.
You will need four M3 machine screws with nuts 5.4mm/6.4 mm (shortest/longest diameter) and no thicker than 2.3mm. Shorten the machine screws if they stick out.
Print Settings
Rafts:
No
Supports:
No
0.2
Infill:
25
Notes:
I used 2.4 mm wall thickness to make it stronger.
Category: Sport & Outdoors