Ice Dripping Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small but usefull drip protector for stick ice. For sticks up to 8 mm width and 2 mm thickness.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 345
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This year, we had the problem that our son's hands were always getting messy from melting ice cream. Therefore, I came up with the idea to design a drip protector for ice cream sticks for him.
The drip protector serves to catch melting ice cream so that it does not drip onto hands or the ground. This helps to keep hands clean and avoid messes, especially on warm days when the ice cream melts quickly. The drip protector is practical and lightweight, making it convenient to use while eating ice cream.
At the end, in case some ice water is left in the protected, it is easy to drink the rest, though the small hole.
It is designed that the stick is tight, so the ice-water will not drip through the stick-hole.
The hole for the stick is: 8 mm wide and 2 mm thick.
Printparameter:
Layer height: 0.2 mm
Line width: 0.4 mm
Walls: 3
Infill: Cubic 15%
Support: no
Printtime: ~ 30 minutes
Used Filament: Elegoo PLA+
Used Slicer: Orca 2.0.0
Used Printer: Elegoo Neptune 4 Pro
I hope you like it as much as I do!
In case you have suggestions for improvements, please contact me!