AKM AK-47 10/30 Round Magazine

updated Version here : https://www.printables.com/model/1208363-akm-ak-47-1030-round-magazine-v2-ar-15-spring-comp

This is a 3d printable Magazine for the AK 47 and AKM pattern rifles.

Included are models for a 10 rnd version which has the same form factor as original AKM AG-4 / Bakelite Magazines, which makes them visually more appealing

All you need for except for the printed part, is a half of a AK-47 Magazine spring, that has to be cut to lenght. after cutitng, you can bend the bottom part of the spring, to make it stay in easier, you will also need an M3- Heatset insert and a M3- Screw with at least 18 mm threads.

After Printing youll need to melt in the heatset insert, then insert the spring and follower, and After that assemble the Magazine, securing the side Part with the M3- Screw.

thise Magazine should be compatible with all surplus Baseplates, that fit on Polymer AK Magazines.

The Magazine Body file, came from the Bakelite Magazine (6L10?) file that is floating around on the Web, and the Follwoer i also found somewhere, so im no original creator, i just tweaked the files for my use case.

Printing
You should have a pretty good calibrated printer to start with, specific settings aren't that important, as this magazine loader doesent recieve to much stress.

The bodies and the baseplate should be printed staying up, the follower and the base plate retainer lying on their side.
It may be advisable to print the tall piece with a brim or some sort of adhesive, if you have problems with bed adhesion, as they have quite a small footprint.
I printed my example with a wall count of 4, but you can make them solid
The filament i used is Esun PLA+, but it should be printale in most filament.
 

printer settings
 nozzle size  0,4mm
 layer height 0,2
 Nozzletemp  205-225 (whatever works for you)
 Bedtemp   60 (whatever works for you)
 walllinecount 4 (whatever works for you)
 supports   enabled