Exchangable Battery Case Chipolo Card
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Chipolo Card using an CR2412 or CR2320 Battery.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ever wished you could just swap out the battery of your chipolo card like with the other chipolo products?
Here is a case that can house the internals of the chipolo card with a swapable CR2412 or CR2320 3V battery. I don't know yet how long the battery will last. Select the appropriate model depending on your type of battery.
The whole assembly is a little bit thicker than the chipolo card, but still very thin.
Use at your own risk!
You will need
Empty chipolo card
Scissors for plastic or a good cutter to open the chipolo card
Some conductive metal strips (like cooper band, desoldering mesh, etc.)
Soldering equipment
CR2412 or CR2320 battery
Isolating tape
Good, precise printer with 0.25mm nozzle
Print parameters
0.25mm nozzle
0.1mm layer height (also for first layer)
30% infill
No supports
Printed with
Original Prusa MK4 with Prusament PETG Chalky Blue
If your printer generates different dimensions, feel free to adjust the dimensions in the attached freecad model.