Concrete Mandalorian Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two part mold to cast a Mando helmet in concrete.
- Ocena
- 0 / 5
- Polubienia
- 89
- Pobrania
- 209
- Wydruki
- 0
- Wyświetlenia
- 1216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used PLA, but TPU may be easier to demold. I used a bag fast-setting Quickrete concrete mix, but I did sift it a little to get the larger aggregate pieces out for a cleaner mold…A self made concrete mix may yield better results. YMMV.
I was able to pull about 5 molds out of the prints with only some issues…eventually another mold would be needed if you wanted to make more or batch some out.
note: I tried cutting the molds in half after printing (pictured)…i thought it would ease de-molding but it was not necessary…patience is key allow the concrete to cure and coat the mold with cooking oil and it will come out nicely.
Happy casting.