LayersFactory
Zgłoś model
1 / 2
pre-sliced Orca Slicer VFA test for Prusa XL — zdjęcie 1
1 / 2

pre-sliced Orca Slicer VFA test for Prusa XL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Be Me

Be Me

@BeMe

PETG 250 °C, Orca Slicer VFA Test, 20-160mm/s (+10 each step)

Ocena
5 / 5
Polubienia
16
Pobrania
228
Wydruki
2
Wyświetlenia
1292
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Prusa Parts & Upgrades
Licencja
GNU General Public License v3.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (2)Kolekcje (43)Powiązane

I am investigating an issue with perfectly repeating VFAs (Vertical Fine Artifacts) on my Prusa XL. By the time, I found more and more examples on other user's Makes that show the same pattern. 

The problem is described here: https://ellis3dp.com/Print-Tuning-Guide/articles/troubleshooting/vfas.html

For comparison and reproduction of the problem I exported this pre-sliced gcode for Prusa XL in stock settings (you can change the toolhead). You can generate it for yourself with Orca Slicer 2.1.0 (I had problems with versions below and above that):

  • Prusa XL, 0.4mm Nozzle
  • Prusament PETG, 250°C first layer, 250 °C other layers
  • VFA Test
    • 20 - 160 mm/s
    • 10 mm/s increase

I am not responsible for any damages running my pre-sliced gcode, which generally has to be done with caution. Please stay with your printer and prepare to interrupt the print, if you notice something strange, especially during the preparation phase of the print.

The .stl file ist just for demonstration, it is generated by Orca Slicer, you do not need to print this, as is contains no speed changes. Orca Slicer will generate the STL for you in the calibration menu.

Please share your makes, which are comparable if you use glossy (black) PETG (Prusament or other brand) and the pre-sliced gcode or the same settings.

Attribution: The VFA calibration test is generated by Orca Slicer, wich was forked of Bambu Studio, which was forked of Prusa Slicer, and so on. Thank you! See Github link below.

Discussion in the Prusa Forum here.

Here you can find some examples of VFAs that seem to be generated by the Prusa XL:

Tagi

prusatestxlslicerorcavfa