1 / 2
KM4CFT CFT1 5 Band CW Field Transceiver - Printed Parts — zdjęcie 1
1 / 2

KM4CFT CFT1 5 Band CW Field Transceiver - Printed Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed parts for the CFT1 Transceiver by KM4CFT

Ocena
0 / 5
Polubienia
4
Pobrania
51
Wydruki
0
Wyświetlenia
634
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

3D printed parts for the CFT1 5-Band CW Field Transceiver.

Recommended to be printed in PETG. Supports are not needed for any of these parts, but supports on the center perimeter arch might be beneficial due to the long bridging move.

VFO and Volume Knob can be printed as-is, but the volume knob can also be done with MMU to get the marking. Use 3MF file to get the MMU design.

UPDATE August 2026: I have added files for the new CFT1v2, which adds a speaker and SWR meter. This has changed the Center and Bottom Pieces to accommodate the speaker. If possible, please use manual supports underneath the speaker.

Buy the CFT1 kit at https://hamgadgets.com/cft1-by-km4cft.html 

Assembly Manual, Schematics and Owner's Manual Can be found at https://hamgadgets.com/pdf 

For those looking to do a half upgrade, those printed parts can be found on Adam Kimmerly's (K6ARK) page: 

Tagi