7inch Monitor Arm Desk Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Found myself working on quite a few SBCs recently and instead of having to pull out a monitor every time I wanted to…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 809
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Found myself working on quite a few SBCs recently and instead of having to pull out a monitor every time I wanted to take a look at what the machine was outputting, figured I'd mount a small monitor to my desk.
However, after some searching I couldn't find one that fit my needs. So I went ahead and deisgned one for myself. Took quite a few variations to get the design how I wanted it and figured I'd share it.
The holes in the C Clamp and Arms are M5 holes, but you can also use 10-32 screws as they are similar enough to fit. The screen is a simpe 7" display found on Amazon (link below). I'd recommend printing the C Clamp at an angle, it's given me the best strength results of the different versions so far.
7" Screen: https://a.co/d/gdjBprV
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
.2
Infill:
25%
Category: Computer
