1 / 5
(Limbus Company) Ahab/Captain of the Pequod Ishmael Harpoon — zdjęcie 1
1 / 5

(Limbus Company) Ahab/Captain of the Pequod Ishmael Harpoon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upper 1: Upper 2 Support Bar .2 .2 .26 Resolution .15 .15 .15 Infill 60 mm/s 70 mm/s Speed Enable Brim for Upper 1 and 2

Ocena
0 / 5
Polubienia
6
Pobrania
134
Wydruki
1
Wyświetlenia
1285
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

From Canto 5 of Limbus Company, Ahab/Captain of the Pequod Ishmael's Harpoon!

This is my first time uploading any of my 3D CAD designs and this was meant to be a starter to get me back into it after a few years of just letting my skills just sit there and not do anything. In the future, I plan to make more Limbus Company Weapons and accessories, and when I am far more skilled in CAD, a T Corp watch!

This print uses a broom handle I bought from Lowes, I was able to guess the thread on the end being 1 3/4 inch UNC, the finish on it is quite strange so for anyone wanting to make this, sand off the finish and re-finish it with something more comfortable.
I believe this is the exact handle I bought: https://www.lowes.com/pd/Truper-TP-60-IN-THREADED-UTILITY-HANDLE/5013365957

FOR PERSONAL NONCOMMERCIAL USE

https://cults3d.com/@MrHShroud

https://x.com/Mr_H_Shroud

https://ko-fi.com/mrshroud

Be sure to leave a comment on what I should make next from Limbus Company! Follow my Twitter for updates and donate to my Kofi if you enjoy my work!

Tagi