1 / 1
Pebblebee tag holder for wallie lever action wallet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://www.printables.com/model/912325-wallie-lever-action-wallet
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 1293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Print upright with supports at 0.12mm or 0.1mm layer height. I used 7 walls and M3x18 screws to install it
I got it right first try so it's not the greatest fit, if I were to do it again I would consider improving the fit on the side without screws and having a little cutout so that contact with the charger is a little better. Printing it in 2 parts could also be unnecessary if if can just be inserted through the back