NICREW ClassicLED G2 shelf mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fitted to the NICREW ClassicLED G2 light and designed for shelf-mounting with two #8 screws. The mount ends slip…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Fitted to the NICREW ClassicLED G2 light and designed for shelf-mounting with two #8 screws.
The mount ends slip easily and securely over the light casing with no modification needed. Once screwed in place, there is enough flex in the plastic to allow you to insert/remove the light from the mounts without having to unscrew/remove the mount ends.
Prints without the need for supports.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.15
Infill:
20%
Filament:
Any ABS or PETG Black
Notes:
Any filament should work since the mount will not come into contact with water. I recommend using PETG or ABS due to their higher heat tolerance compared to PLA.
Category: Pets