Aquarium Plant Rooting aid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple aquarium plant rooting aid, 10.5cm x 3cm x 1.6cm. Tie or glue the plant to the raised portion of the grid;…
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 1175
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple aquarium plant rooting aid, 10.5cm x 3cm x 1.6cm. Tie or glue the plant to the raised portion of the grid; the lower portion and filled squares are for weighing the structure down with substrate. The grid shouldn't impede root growth and allows the substrate to come into full contact with the roots.
PLA and PETG are both denser than freshwater so 100% infill will naturally sink to the bottom of the tank.
On safety and longevity:
Both PLA and PETG plastics are generally considered food safe but some of the dyes and additives might not be, so I use "natural" colour to be safe.
I recommend printing in PETG long term since PLA is biodegradable and the presence of heat and water will cause it to break down (though from all accounts I've read, it will still last for over a year).
Disclaimer: I'm a hobbyist, and everything I've stated is based on personal experience and google search results; I recommend doing your own research and consulting professionals whenever possible.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Doesn't Matter
0.2
Infill:
100%
Filament:
Any PLA or PETG Natural
Notes:
The overhangs will print without supports but may lead to stringing.
Category: Pets