1 / 4
Dart Zone Venom Pro Picatinny Stock Attachment Point — zdjęcie 1
1 / 4

Dart Zone Venom Pro Picatinny Stock Attachment Point

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stock attachment point that allows you to use picatinny stocks on your Dart Zone Venom Pro

Ocena
4,833 / 5
Polubienia
99
Pobrania
669
Wydruki
9
Wyświetlenia
3019
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This needs 2x M3x6mm SHCS and 2x M3 nuts, print all parts without supports. Press the M3 nuts into the inside of the stock point, then screw the SHCS through the picatinny, through the stock point and into the nuts. 

This attaches to the blaster without changing out the original picatinny, and uses the “sling point” on top to to hold the stock point in. Use the “Lock” part to connect the two. 

I am working on finalizing the stock to go with this. It should be out in the coming weeks. I will link it once its out. The stock pictured is a modified GNK-200 stock, and the one I plan to release will have the same rear geometry, but different mounting geometry. 

Print the parts in this geometry

Don't have a printer? Order from OOD! Affiliate link!

Tagi