Parametric Whestone Holder with Magnetic Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A whetstone holder with magnets to secure it to a kitchen service counter/butcher table.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v2.0
This is a whetstone holder base with magnets in the bottom to secure it to a metal table/counter (including ferritic stainless steel). Dimensions for different size whetstones can easily be adjusted by changing two variables in the included OpenSCAD files (default stone size is 60x178mm).
It uses four (4) 20x6x2mm magnets.
There are two versions, one which has magnets attached with adhesive (superglue) on the bottom of the model and one which has the magnets embedded in the print (a pause command needs to be inserted at the appropriate level during slicing to place magnets - layer 18 with a layer height of .15 and a bottom layer of .20).
- Layer height 0.15mm
- Infill 15%
- Perimeters: 3
- No supports