10-inch Rack Mount Blanks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A couple of 10-inch rack mount blanks.
- Ocena
- 4,964 / 5
- Polubienia
- 344
- Pobrania
- 4097
- Wydruki
- 31
- Wyświetlenia
- 9224
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 1U rack-mount blank for 10-inch racks.
I've included three versions:
A solid one.
One with a honeycomb pattern.
One with holes for ventilation or cables.
All are 2.5mm thick.
Updates
(08 July 2026): I've added some blank variants that have extra functionality. So if you're looking for something more than a plain blank, check the models below.
Passthrough blank. This allows you to pass cables and other things from inside your rack to the outside, while also covering 1U.
Cable guide with modular hooks. This one is a 1U blank with hooks, with 50mm-100mm in size that can be used as a cable guide.
Passthrough blank with cable duct. This one is a 1U passthrough blank that has a duct, so you can pull cables from your rack and keep them hidden with a faceplate.
This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here.
Do you like my models? Consider buying me a coffee ;)
Print Settings
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
At least 3.
Infill:
20% or more
Filament:
PLA/PLA+/PETG/ABS/ASA/Nylon