1 / 9
WAGO 221 DIN rail clip holder with label — zdjęcie 1
1 / 9

WAGO 221 DIN rail clip holder with label

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy to print DIN rail Clips for WAGO 221-415. Based on OV1A's design. Made it wider to match the width of the 221-41...

Ocena
5 / 5
Polubienia
44
Pobrania
320
Wydruki
1
Wyświetlenia
1818
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Easy to print DIN rail Clips for WAGO 221-415. Based on OV1A's design.
Made it wider to match the width of the 221-415 and added a section on top that acts as room for a label and as a lever for easier removal of the clamp from the Rail.

Will fit slimmer Wago 221-models as well, but the holder will obviously stick out to the sides.

Based on a Model by Jens Petersen (https://www.thingiverse.com/ov1a/designs) - satisfying snap when attaching to the rail, holds the Wagos tightly, so you can open and close them while in the holder.

Category: Electronics

Tagi