1 / 8
Unifi U7 Pro Wall - Table Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed the table stand for this access point but it's not in stock yet.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 336
- Wydruki
- 0
- Wyświetlenia
- 2140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (45)Powiązane
For this model you will need :
- 4 M3x4mm Threaded Heat Set Inserts
- 4 M3x6mm Flat head screws
The mounting plate used is the one supplied with the access point.
This model was printed with :
- ASA Filament (Aurapol Signal White)
- Layer Height : .2 mm
- Wall Loops : 4
- Top Shell Layers : 4
- Bottom Shell Layers : 4
- Infill : 30%
- Support : Yes - Tree Manual
- Brim : Yes - Outer