Seadoo Spark Dual Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @knbrown_213027's Sea Doo Spark Cupholder which mounts in the OEM location of the Spark SunShade (if installed)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Modified the original model by removing material where I thought it was not needed in an effort to reduce filament usage, support material and print time.
I used some modified print settings to help make the part extra rigid now that some material was removed from the model.
- 0.4mm nozzle
- 0.3mm layer height
- 15% gyroid infill
- 3 perimiters (makes walls for thinner sections solid)
- Support on build plate only, with grid supports
(other settings will likely work too, but these worked well for me)
I printed this twice, once using Ooznest Black PETG, and a second time using 3DQF's Black PETG.
Using these settings, my slicer shows 50.55m of material usage (7h55m print time)
Original model with same settings would be 84.76m of material (11h34m print time)
So this model takes 40% less material, and is 30% quicker to print than original.
Still compatible with the authors original mounting plate.