1 / 1
Door STOPs for Sovol SV08 - Holds enclosure doors open
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The goal here was simple: make a couple blocks that could be employed to keep the doors open during PLA prints.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 138
- Wydruki
- 2
- Wyświetlenia
- 504
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (36)Powiązane
just print them, and then you can use these to hold the doors open on your SV08 enclosure. I used PLA, but I imagine anything will work.
No supports needed in the set orientation.