Makita & Festool track router base plate. v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makita router base plate for use on Makita and festool tracks
- Ocena
- 5 / 5
- Polubienia
- 127
- Pobrania
- 731
- Wydruki
- 2
- Wyświetlenia
- 3428
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This router base plate fits Makita tracks and uses the adjustable fence tightening knob provided by the manufacturer to adjust out the slop for a tighter fit. This plate can also be used as a mini extended base.
Note. There are no threads designed in, I just used the knob to make threads, it worked ok for me.
The V2 variant also fits in the Makita packout insert without removing it from the router. That can be found here.
https://www.printables.com/model/964496-v2-makita-router-packout-insert-40v-xgt-18v
Print settings recommend.
Wall loops. 3
Infill. 20%to 30% grid. with a thicker bottom layer 5-7. I also like 0.6 on the sparse infill line width
Print orientation. Flat on the build plate. (bottom down)
Also recommend rotating 45⁰ if needed so that support is oriented along the part. (length wise)
Filament. PETG-CF, PETG, PCTG, NYLON -CF
Support. Snug normal. “On build plate only” turned on