1 / 5
Micro Dice Tower (Blank, DnD, CoC)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As small as possible dice tower that rolls your dice well and fits the whole set inside. DnD and CoC versions included.
- Ocena
- 4,909 / 5
- Polubienia
- 542
- Pobrania
- 2636
- Wydruki
- 24
- Wyświetlenia
- 8532
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 24) (Komentarze: 30)Remiksy (2)Kolekcje (762)Powiązane
A small (about UNO cards stack sized) dice tower with dice tray included.
Both parts print without supports and use about 70 grams of filament.
HIGH ROLLS GUARANTEED*
The tower can fit a whole set of standard dice for storage. Put on the tray to keep them inside
The bumps on the tray and indents on the tower allow you to lock the tray to the tower in two positions. To close it after use and to lock it in place when using so the tower doesn't slide on the tray.
Ribs on the steps of the tower to make sure that your rolls will be thorough and random
For printers without multicolor printing, you can apply color change for a few layers to make the logo and bottom of the tray a different color (at 0.2 layer height It's for layers 3-7).
You can choose between a blank, Call of Cthulhu or Dungeons and Dragons versions.
Make your own version by cutting any logo or text on the blank tower and tray
Recommended depth:
Tower: 0.25mm
Tray: 0.4mm
*not really, but my friends and I had some good luck while using those during our last Call of Cthulhu session :)