Tronxy X5s Inductive Probe and X endstop mount for Fang Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked user Junaling's hanging cooler but there was not bed leveling sensor for the x5s that would work with…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really liked user Junaling's hanging cooler but there was not bed leveling sensor for the x5s that would work with his cooler, so i designed this one it incorporates the x endstop as well , it uses two M2 screws (i got them from an a CR10 stock part fan screws) to clamp it together, if you look in the picture the screws are going from right to left , that has been changed in the uploaded model , i realized it was a pain to adjust the sensor with the cooler installed with the screws in that direction
if you use this the X and Y offsets for marlin are
X -46mm
Y -13.5mm
Print instructions
Unassociated tags: Bed sensor
Category: 3D Printer Parts