Brick It! Pattern Roller - Business Card Embosser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the Business Card Embosser model, I designed matching pattern rollers in a Brick design.
- Ocena
- 4 / 5
- Polubienia
- 49
- Pobrania
- 191
- Wydruki
- 1
- Wyświetlenia
- 2404
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome, If you enjoyed my model, please consider supporting me by sharing your make and leaving a like. For information, filament tests, and much more, all about 3D printing, feel free to check out my homepage or join my Filament Deal Channel. Check out my models :) |
Inspired by the Business Card Embosser model, I designed matching pattern rollers in a Lego Brick design.
Simply download the necessary parts (body and gear) from the original model and use them with these rollers.
As with the original, the tolerances are quite tight.
Material
go with the one you like. I used PLA.
Printing
0.16mm layer height
3 wall loops should do the job
25% infill to make it a bit sturdy
Share your makes and support me
If you like my work, you can support me here, via Ko-Fi or Patreon. Please leave a comment or share your makes 😁.
I appreciate your support!
If your interested in selling the printed models DM me.