1 / 1
Jar lid organizer/storage - 70mm or 2.8in (half height (72mm) — zdjęcie 1

Jar lid organizer/storage - 70mm or 2.8in (half height (72mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

https://makerworld.com/en/models/481574#profileId-393406

Ocena
5 / 5
Polubienia
8
Pobrania
22
Wydruki
1
Wyświetlenia
152
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Jar lid organizer for 70mm lids. Requires around 70g of PLA.

Print settings:

  • 2 walls
  • 20% gyroid infill
  • no supports!

Tagi