One Line Fox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a Simple One Line Fox with an optional base. I simply centered both in Cura and raised the Fox up around 1.5mm.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 141
- Wydruki
- 2
- Wyświetlenia
- 639
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Here's a Simple One Line Fox with an optional base. I simply centered both in Cura and raised the Fox up around 1.5mm. Then you can group the base and the Fox together and scale it however you'd like.
Print instructions
Category: Decor Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 3
Rafts: No
Supports: Yes
Resolution: 0.2mm
Notes:
I think printing it on its side with supports will give the best look, but it will print standing up if you're comfortable removing supports.
How I Designed This
Or download the .f3d file in the Downloads section.