Case Fan for Pigeon Cloud Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I think the Pi zero gets pretty warm without any assistance so drop one of these fans into the Pigeon case and plug it…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I think the Pi zero gets pretty warm without any assistance so drop one of these fans into the Pigeon case and plug it in or solder it to the Pi zero.
Made to fit a 5v 30x30x7mm fan such as these https://smile.amazon.com/gp/product/B0792BW2VH/
I made the slots a little wider so it does notreally require screws to put the back plate into the case. Mine is just press-fit.
I used 3 M2 screws and nuts to hold the fan in place.
Feel free to edit the Fusion 360 file and post a remix!
Print instructions
Unassociated tags: 3d printing, pi zero, raspberry pi, raspberry pi camera
Category: Camera How I Designed This
Fusion 360 and some tedious tracing of the original back cover