Clip-on coil/PCB protector for Cartographer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clip-on covers the thermistor and capacitor of the Cartographer probe to prevent damage in case of a head crash.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 179
- Wydruki
- 3
- Wyświetlenia
- 735
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The thermistor and capacitor on the coil PCB of the Cartographer probe are a bit exposed and could be damaged in case of a head crash or if the PCB touches a curled print. This clip-on protects the PCB. It simply clips on to the coil PCB.
Print in ABS or ASA.
0.4mm nozzle
0.2mm layer height (including the first layer)
0.4mm line width for all line types
It's sized for prints in ABS (including shrinkage). If it does not fit, play around with the shrinkage parameter in your slicer.
F360 file is available in a few days on request (I have to clean that up first ;-) )