1 / 7
Menlu 8mm/12mm Cut Tape Holder for LumenPnP — zdjęcie 1
1 / 7

Menlu 8mm/12mm Cut Tape Holder for LumenPnP

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 8/12mm cut tape holder for the LumenPnP pick and place machine and compatible with the feeder slot harness.

Ocena
0 / 5
Polubienia
8
Pobrania
83
Wydruki
0
Wyświetlenia
539
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

I wanted to get rid of the overhanging cut tape strips at the front of my LumenPnP pick and place machine. 

I found two existing designs here but those did conflict with the LumenPnP feeder slot harness for the Photon Feeders of the recent LumenPnP versions.

So, I made a new one which is the same width as the LumenPnP Photon feeders and can be inserted into any slot of the feeder harness or elsewhere on the aluminum rail. 

I also wanted to have a cover (existing ones were just open to the side) and finally added a slot for a small paper label to the top side.

The cover has a printed M8 thread and can be screwed to the main part.

Works for both 8mm or 12mm cut tape.

Printing

I printed in PLA (Overture PLA Professional) on a Prusa Mini+, 0.4mm nozzle and 0.15mm layer height. 

Both parts do not require any supports. Make sure to place the cover with the flat side to the bed. I would recommend to use 3-4 perimeters for the cover to make the thread more robust. Not needed for the main part.

A .3mf File for the Mini+ is available or just use the STL files.

Label

The paper label should be 40.5mm x 14mm.

Tagi