Night In The Woods - Gregg Ring (WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Work in progress - Inspired by Arroyo 's NITW Mae ring and is made using Wickdraw's Gregg design. I plan on updating it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Work in progress - Inspired by Agustin Arroyo's NITW Mae ring and is made using Wickdraw's Gregg design. I plan on updating this since this is my first attempt. The design shouldn't need supports and I believe the mistake in the photo is just from my printer. The teeth and left overhang are most likely to get messed up at the moment (at least at this time and with my printer). Feedback is appreciated!
The inner diameter of the ring is 16mm. Change before printing. The filament I used for this is Mika3D PLA. I used an ender 3 in .08 mm with no supports. Only took me 1.09 grams.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
**Rafts:**
No
Supports:
No
**Resolution:**
.08 mm
Infill:
100%
Notes:
WIP, will probably be updated
Category: Accessories