Original Creality Ender 3 V3 KE/SE Bed Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the original bed spacers for the Creality Ender 3 V3 KE and SE.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 618
- Wydruki
- 2
- Wyświetlenia
- 3011
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These bed spacers were designed to be easily printed. You can print the spacers as singles or all together. The inner hole diameter is 4.25 mm, and each spacer is 8 mm wide. Two 16 mm spacers go on the right side (when viewing from the front or top of the printer) of the build plate, and two 14 mm spacers go on the left side (looking from the front or top) of the build plate. Thank you and enjoy!
Recommended material(s) to use: Nylon, ABS, PCTG, PETG
*The recommended materials are a suggestion, and you DO NOT have to use those materials, but if you are worried that the spacers may deform under normal use of your printer, I recommend using these materials or any other high-temp material just to be safe. Whatever material you use, just pay attention to the maximum temperature your chosen material can handle. I used “3DFuel's Cobalt Blue Pro PCTG” to print my spacers, which can withstand temperatures up to ~80⁰C before showing signs of deformation.