Duplo Train Track - Extra Long Straight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lego Duplo Train compatible Train Track that's 7.5 inches long
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 226
- Wydruki
- 2
- Wyświetlenia
- 656
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is for a Duplo Train compatible Train Track. This straight track is 2 ½ inches longer or 1 railroad tie longer than the straight track supplied with the original train set. It is completely Duplo brick compatible. Features have been added to the design to reduce the amount of Support material required and to yield improved bed adhesion. I printed with 3 wall loops, a 15% infill and a 0.2 mm layer height although these parameters are not critical. I used Normal Supports with style set to Snug. I painted out or removed Supports where there was a small bridge.
Check out my other Duplo Train Track models:
https://www.printables.com/model/981247-duplo-train-track-straight-and-curve
https://www.printables.com/model/984183-duplo-train-track-short-straight
https://www.printables.com/model/1053359-duplo-train-track-extended-curve